Intellinet-network 524681 User Manual Manual de usuario descargar pdf (Pagina 107)

100

3-3-1 Access Control

This function allows or denies computers with specific MAC

addresses access to the network; it can also allow or deny

computers with a specific IP address, protocol or port.

Click “Firewall” on the left side of the Web management interface,

then click “Access Control.” The following message will be

displayed on your Web browser:

Below are descriptions of the options:

Enable MAC Check this box to enable MAC address based

Filtering (1): filtering, and select “Deny” or “Allow” to

determine the behavior of the MAC filtering

table. If you select “Deny,” all MAC addresses

listed in filtering table will be denied from

connecting to the network; if you select “Allow,”

only MAC addresses listed in the filtering table

will be able to connect to the network, and all

other network devices will be rejected.

Client PC Enter the MAC address of the computer or

MAC address (2): network device here. Dashes ( - ) and colons ( : )

are not required; i.e., if the MAC address label

of your wireless device is “aa-bb-cc-dd-ee-ff” or

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 141 142

Sin comentarios

Intellinet-network 524681 User Manual Manual de usuario Pagina 107