Intellinet-network NSC18-WN User Manual Manual de usuario descargar pdf (Pagina 32)

WEB MANAGEMENT INTERFACE

3.5.3 E-Mail

As mentioned in 3.5.1 Motion Detection, these settings need to be

enteredbeforeyoucantakeadvantageofthe“Sendsnapshotleto

E-Mail” option.

Recipient E-Mail Address—Entertheaddresslesaretobesentto.

E-Mail Subject — Enter something that will indicate the desired level of

importance or urgency to the recipient.

SMTP Server — Enter the IP address or hostname of the SMTP server

 (theserverthatdeliversyoure-mail).Ifyoudon’tknowit,refertoyour

 e-mailsoftware(e.g.,OutlookorOutlookExpress)oraskyournetwork

administrator or ISP.

Sender E-Mail Address — Enter the address of the e-mail sender. This

 willmakethee-mailmorereadilyidentiableastoitspurposeand

importance. NOTE: Some servers won’t forward e-mail from unknown

senders, so it’s highly recommended that you enter a valid address.

SMTP Authentication — Some SMTP servers require e-mail senders

to be authenticated. If you’re not sure whether to select “Enable” or

 “Disable,”refertoyoure-mailsoftware(e.g.,OutlookorOutlook

 Express)oraskyournetwork administrator or ISP.

User Name — If your SMTP server requires authentication, enter your

SMTP server username.

Password — If your SMTP server requires authentication, enter your

SMTP server password.

Apply — Click to put any of the above settings/changes into effect.

Send a test e-mail—Clicktoconrmthatyoursettingsarevalidand

that the function is operating properly.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Sin comentarios

Intellinet-network NSC18-WN User Manual Manual de usuario Pagina 32