Intellinet-network NSC18-WN User Manual Manual de usuario descargar pdf (Pagina 46)

SURVEILLANCE SOFTWARE

Channel — Select the channel number you want to set.

Camera Search — All cameras found on your local network will be

displayed in this window.

Select — With a camera highlighted in the Camera Search window,

 click“Select”tollintheCameraCongurationtexteldsinthepanel

above with that camera’s parameters.

Refresh — Ifthecamerayouexpectedtoseedoesn’tappearinthe

 CameraSearchwindow(includinganycamera[s]connectedtoyour

 networksincethelastscan),clicktorescanandre-display.

Name* — Enteraneasilyrecognizablenamefortheselectedcamera

so you can quickly identify its location and purpose. The default entry

 istherstsixdigitsofthecamera’sMACaddress.

Model — Thisidentiestheselectedcamera(andcan’tbechanged).

IP* — Enter the IP address of the selected camera.

Username — Enter the username of the selected camera.

Web Port* — Enter the Web port of the camera. The default is 80.

Password — Enter the password for the camera. The default is 1234.

Video Format — From the drop-down menu, select either MJPEG or

MPEG4.

Reset — ClicktocleartheeldsintheCameraCongurationpanel.

OK — Click to save the

current settings. If all

entries and changes

are made correctly,

the selected camera’s

view will display on

 theViewerscreen(as

 shownatright).

Cancel — Click to

cancel any changes

you’ve made before

saving.

* It’s recommended

 thatyouclick“Select”tollthiseld.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

Sin comentarios

Intellinet-network NSC18-WN User Manual Manual de usuario Pagina 46