Intellinet-network NSC18-WN User Manual Manual de usuario descargar pdf (Pagina 7)

COMPONENTS & CONNECTIONS

1.2 Back / Connections

1. Connect one end of the included

 Ethernetcable(orasimilarone)

to your local area network and

the other end to the LAN port.

NOTE: You can skip this step

if you plan to use a wireless

LAN only.

2. Plug the included power

adapter into an A/C outlet

and connect it to the 12VDC

power jack.

3. Attach the two included

antennas to the connectors

 (shownalreadyattached

 atright).

4. Press the WPS buttons

on both the camera and

 youraccesspoint(s)to

establish Wi-Fi Protected

Security between the devices.

5.Ifdesired,connectanexternalspeakertothe3.5mmAudioOutjack.

6.Asneededordesired,insertanSD(securedigital)orSDHC(high-

 capacity)cardintotheSDslottodownloadupto8GBofvideoles.

NOTE:RefertoSection3.5.5MotionDetection/SDCardConguration

and Section 3.8 SDHC.

7. Positionthecamerainasecurelocation(seeSafetyPrecautions

 above)andaimitasdesired.

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Sin comentarios

Intellinet-network NSC18-WN User Manual Manual de usuario Pagina 7